The vessel that is used for the storage of the domestic cold water that many homes use is called a cylinder. These cylinders are made from very strong and durable plastic that is also very flexible for installing in a loft or high roof space. they are temperature and bacteria resistant. A Brixton Plumber is a qualified professional By using an insulating material it will stop the water from freezing. These modern types of vessels need to have a sound base for support. They cannot be placed across joists without putting a solid platform between the vessel and the joists. This is because the high volume of water is very heavy and can distort the cylinder. Also, the cylinders outlets need to be higher than any of the draw off points for fittings and appliances. the inlet water is controlled by a valve called a ballcock or ball valve. It is a diaphragm valve rather than an older style valve. The diaphragm valves discharges water from the top and this allows a sufficient air gap to prevent backflow. This allows the cylinder to be filled and shut off automatically according to its water level. The valve can be adjusted to maintain a specific level. The outlet from the cylinder should be near the base or even below so that debris cannot accumulate. Brixton Plumbers always carry the correct tools for any plumbing jobs. The inlet and the outlet need local valves for isolation. The inlet has a plug valve type. The outlet is a regular gate valve. The cylinder has an overflow that is positioned over the maximum water level but under the inlet enough to keep the required air gap. The overflow runs down so that water flows out through an outside wall. The pipe should be insulated and protected with a mesh screen to stop insects and dirt from entering the system. The pipe is usually 19mm.
Call Us Now!